Types and structure of heterophase inclusions in steels
DOI:
https://doi.org/10.30838/J.PMHTM.2413.260319.30.298Keywords:
steel, heterophase nonmetallic inclusions, microcomposite inclusions, structure, phase compositionAbstract
Purpose. The problem of the influence of heterophase nonmetallic inclusions on the properties of steels is actual. The goal of the work was to study the main types and structures of heterophase nonmetallic inclusions in steels. Methods. Comprehensive methods for the study of heterophase non-metallic inclusions (metallographic, petrographic, X-ray microanalysis methods) were used. Results. It has been established that heterophase inclusions have different structure and phase composition. The features of various combinations of phases in microcomposite inclusions are shown. The main types of hetero-phase inclusions in steels are established. Scientific novelty. The structural features of heterophase inclusions in steels are established. A classification of microcomposite heterophasic inclusions is proposed: inclusions of the first type “high-melting phase surrounding with low-melting cover”; the inclusion of the second type of “phases are beside”; the inclusion of the third type of “eutectics”; Inclusions of the fourth type “dispersed phases in a non-metallic matrix”; inclusions of the fifth type "eutectics inclusion-matrix". Practical significance. The use of the obtained results will make it possible to develop technologies for the production of steels with regulated content and types of heterophase non-metallic inclusions, which will significantly improve their technological, mechanical and operational properties.
References
Неметаллические включения в стали : монография / [С. И. Губенко, С. П. Ошкадеров]. − Киев : Наукова думка, 2016. – 528 с. 2. Губенко С. И., Галкин А.М. К вопросу о природе красноломкости стали / С. И. Губенко, А. М. Галкин // Металловедение и термическая обработка металлов. – 1984. – № 10. – С. 11–15. 3. Бельченко Г. И. Микронеоднородная деформация стали, содержащей неметаллические включения / Г. И. Бельченко, С. И. Губенко // Известия АН СССР. Металлы. – 1981. – № 4. – С. 94–97. 4. Губенко С. И. Возможности трансформации неметаллических включений и межфазных границ включение-матрица при высокоэнергетических обработках сталей / С. И. Губенко // Металлофизика, новейшие технологии. – 2014. – Т. 36, № 3. – С. 287– 315. 5. Gubenko S. Influence of Nonmetallic Inclusions on Microbreaks Formation in Wheel Steel and Railway Wheels / S. Gubenko, Y. Proidak, A. Kozlovsky, A. Shramko, M. Iskov // Telematics, Logistics and Transport Safety : mater. of VIII-th scient. conf. TLTS’08. – Poland, Katowice-Cieszyn. – 2008. 6. Включения в легированных сталях и сплавах : монография / [М И. Виноград, Г. П. Громова]. − Москва : Металлургия, 1972. – 216 с. 7. Неметаллические включения в стали : монография / [Р. Кисслинг, Н. Ланге]. – Москва : Металлургия, 1968. – 124 с. 8. Петрография неметаллических включений : монография / [Т. И. Литвинова, В. П. Пирожкова, А. К. Петров]. – Москва : Металлургия, 1972. – 460 с. 9. Основы металлографии чугуна : моноорафия / [К. П. Бунин, Я. Н. Малиночка, Ю. Н. Таран]. – Москва : Металлургия, 1969. – 415 с.
Downloads
Published
Issue
Section
License
Authors that are published in this journal agree to follow the conditions:
Authors reserve the right to the authorship of his work and cede the right to the journal of first publication of this work on conditions of the license under the Creative Commons Attribution License, which allows others to distribute it freely with the obligatory reference to the author of the original work and the first publication of the work in this journal.
