Polygonizing controlled rolling of slabs for making oil country tubes

Authors

  • D. V. Laukhin State Higher Education Establishment “Pridneprovsk State Academy of Civil Engineering and Architecture”, Ukraine

Keywords:

structural changes, hot deformation of the metal, controlled rolling, the degree of deformation, the austenite grains

Abstract

The paper contains theoretical and experimental studies of structural changes during hot deformation of the metal-bound process of controlled rolling. The effect of preheating temperature and the degree of deformation on the austenite grain size was studded. Diffraction methods to determine the parameters of the polygonal structure formed during hot deformation and shows the quantitative changes in her period after deformation was used. The nucleation of recrystallized in poligonized ferrite, as well as the nature, structure and properties of special boundaries in terms of lattice theory of coincident sites was considered.

Author Biography

D. V. Laukhin, State Higher Education Establishment “Pridneprovsk State Academy of Civil Engineering and Architecture”

Department of Materials Science, Professor

References

Bolshakov V. I. Effect of austenitizing and working time upon structure and properties of low-carbon steels 09G2S and 10G2FB / V. I. Bolshakov, G. D. Sukhomlin, D. V. Laukhin, L. N. Laukhina // Theoretical Foundation of Civil Engineering: Polish-Ukraїnian Transactions. – Warsaw, 2005. – V. 13. – Pр. 83–88.

Bernshtein М. L. Structure of Deformed Metals / М. L. Bernshtein – Мoscow.: Меtallugiya, 1977. – 432 p.

Gridnyov V. I. Strength and Plasticity of Cold Worked Steel / V. I. Gridnyov, V. G. Gavrilyuk, Yu. Ya. Меshkov. – Кyiv : Naukova Dumka Publishers, 1974. – 231 p.

Yokota T. H.K.D.H. Formation of nanostructured steel by phase transformation / T. Yokota, C. Garica–Mateo, Bhadeshia // Scripta Materialia. – 2004. – Vol. 51. – Pр. 767–770.

Bolshakov V. I. Thermomechanical treatment of construction steels /

V. I. Bolshakov // 3rd edition: Basilian Press. – Сanada. – 1998. – 316 p.

Langford G. Subgrain strengthening of materials / G. Langford, M. Cohen // Trans. ASM. – 1969. – Vol. 62. – Pр. 823–835.

Bolshakov V. I. Polygonization of austenite during controlled rolling. /

V. I. Bolshakov, D. V. Laukhin. – Dnipropetrovsk : PSEABA, 2011. – 353 p.

Utevsky L. М. Diffraction electron microscopy in physical metallurgy /

L. M. Utevsky. – Мoscow. : Меtallurgiya Publishers, 1973. – 584 p.

Electron microscopy of thin crystals / [Hirsh P., Hovi А., Nickolson R. et al.]; [English-Russian translation by L. М. Utevsky]. – Мoscow. : Мir Publishers, 1968. – 574 p.

Downloads

Published

2014-01-19

Issue

No. 1 (2014): Metal Science and Heat Treatment of Metals

Section

Technical science

License

Authors that are published in this journal agree to follow the conditions:

Authors reserve the right to the authorship of his work and cede the right to the journal of first publication of this work on conditions of the license under the Creative Commons Attribution License, which allows others to distribute it freely with the obligatory reference to the author of the original work and the first publication of the work in this journal.