Fractal approach to assessment of mechanical properties of steel ST6
DOI:
https://doi.org/10.30838/J.PMHTM.2413.241219.64.603Keywords:
steel Ст6, fractal analysis, mechanical properties, perlite, ferrite, model, forecastAbstract
Problem statement. The relevance of the work lies in the development of an approach to the rapid assessment of the mechanical properties of medium-carbon steels for general purposes in the state of factory delivery. To solve this problem, it is proposed to use the apparatus of fractal analysis, which allows you to evaluate the structural elements of various geometric complexity. Object of study. The object of the study is the fractal dimensions of structural elements of steel Ст6 in a state of factory supply and its mechanical properties. Materials and research methods. For fractal studies of the ferrite-pearlite structure of Ст6 steel, the developed and patented methodology was used. The essence of the technique is to find the convergence of the values of the fractal dimension of the structure, calculated using the point and cell methods. Fractal analysis was carried out at a 400-fold increase in the structure. Mechanical tests were carried out according to ГОСТ 535-2005. Results and its discussion. The dependencies between the tensile strength, yield strength, hardness, elongation of steel Ст6 and the fractal dimension of ferrite and perlite are obtained. A one-to-one correspondence is observed between the strength, hardness, plasticity and fractal dimension of perlite (pair correlation coefficients are fixed within 0,66…0,86). A connection was also established between the relative elongation and the fractal dimension of ferrite (r2 = 0,61...0,77). An increase in the strength and hardness of steel was recorded with an increase in the fractal dimension of perlite. An increase in the ductility of steel (elongation) was also recorded with an increase in the fractal dimension of ferrite. This may be due to the fact that equiaxed metal grains are characterized by better mechanical characteristics and have a dimension close to the topological dimension of the thin section plane 2. Conclusions. Models for predicting the mechanical properties of medium carbon steel Ст6 are obtained based on an analysis of the fractal dimensions of its ferrite-pearlite structure. The proposed approach can be considered as a methodology for the rapid assessment of the quality criteria of medium-carbon steels in the state of factory supply based on an analysis of their structure.References
Zhuravel' I.M. Computer Analysis of the Distribution of Grain Sizes in the Structure of 12Kh1MF Steel After Operation, 2019, vol. 55, no 2, рp. 187-192.
Mishutin A.V., Kroviakov S.O., Mishutin N.V., Bogutsky V.L. Modified expanded clay lightweight concretes for thin-walled floating structures. Proceeding of the Second International Conference on Concrete Sustainability (ICCS16) (Madrid, Spain,
-15 June 2016).Barcelona,Spain :InternationalCenter for Numerical Method in Engineering, 2016, pp. 743-749.
Ivantsov S.V. Vplyv parametriv struktury na kinetyku ruynuvannya mikrolehovanykh budivel’nykh staley [Influence of structure parameters on the kinetics of fracture of microalloyed structural steels]. Diss. na soisk. uchen. step. kand. tehn. nauk : 05.02.01 [Candidate Dissertation for Technical Sciences (05.02.01 – Materials Science)]. Dnipropetrovsk, 2014, 192 p. (in Ukrainian).
Lyashenko Т., Voznesensky V. and Krovyakov S. Analysis of water effect on fracture toughness in cement-based composites using computational materials science methods. International symposium on brittle matrix composites. 2000, pp. 210-219.
Bolshakov V.I., Volchuk V.N. and Dubrov Yu.I. Fraktaly v materialovedenii [Fractals in materials]. Dnipropetrovsk : PSACEA, 2005, 253 p. (in Russian).
Bolshakov V.I., Volchuk V.N., Dubrov Yu.I. and Deineko L.N. Formirovanie modeli prognoza kachestva materiala, osnovannoj na `ekspertnoj ocenke i aktivnom `eksperimente [Formation of a model for predicting the quality of a material based on expert judgment and an active experiment]. Komp'yuternoe materialovedenie i obespechenie kachestva : mater. k 45-mu mezhdunar. sem. po modelirovaniyu i optimizacii kompozitov [Computer Science and Quality Assurance : mater. to the 45th Intern. Sem. on modeling and optimization of composites].Odessa : AstroPrint, 2006, pp. 146−150. (in Russian).
Gödel K. Über formal unentscheidbare Sätze der Principia Mathematica und verwandter Systeme I. Monatshefte für Mathematik und Physik. 1931, vol. 38, no. 1, рр. 173-198. (in German).
Bolshakov V.I., Volchuk V.N. and Dubrov Yu.I. Materialovedcheskiye aspekty primeneniya chastichnoy kompensatsii nepolnoty formal'noy aksiomatiki [Material aspects of use of partial compensation of incompleteness of formal axiomatics]. Visnyk Prydniprovs’koyi derzhavnoyi akademiyi budivnytstva ta arkhitektury [Bulletin of Prydniprovska State Academy of Civil Engineering and Architecture]. 2015, no. 5, pp. 10–16. (in Russian).
Mandelbrot B.B. The Fractal Geometry of Nature. New-York, San Francisco: Freeman, 1982, 480 p.
Bolshakov V.I., Volchuk V.N. and Dubrov Yu.I. K voprosu o postanovke zadachi identifikatsii fraktal'noy struktury metalla [Statement on the issue of the problem identification of fractal metal structures]. Visnyk Prydniprovs’koyi derzhavnoyi akademiyi budivnytstva ta arkhitektury [Bulletin of Prydniprovska State Academy of Civil Engineering and Architecture]. 2016, no. 5, pp. 35–39. (in Russian).
Bolshakov V., Volchuk V. and Dubrov Yu. Puti primeneniya teorii fraktalov [Ways of applying the theory of fractals]. Saarbrucken : Palmarium Academic Publishing, 2016, 146 p. (in Russian).
Bolshakov V.I., Volchuk V.N. and Dubrov Yu.I. K opredeleniyu metriki ob"yekta identifikatsii [To the definition of the identity metric]. Metallovedenie i termicheskaya obrabotka metallov [Metall Science and Heat Treatment of Metals]. 2016, no. 4, pp. 10–14. (in Russian).
Kroviakov S., Volchuk V., Zavoloka M., and Kryzhanovskyi V. Search for Ranking Approaches of Expanded Clay Concrete Quality Criteria. Materials Science Forum. Trans Tech Publications Ltd, 2019, vol. 968, pp. 20-25.
Volchuk V.,KlymenkoI., Kroviakov S. and Orešković M. Method of material quality estimation with usage of multifractal formalism. Tehnički glasnik - Technical Journal. 2018, vol. 12, no. 2, рр. 93-97.
Volchuk V.M. K primeneniyu fraktal'nogo formalizma pri ranzhirovanii kriteriyev kachestva mnogoparametricheskikh tekhnologiy [On the Application of Fractal Formalism for Ranging Criteria of Quality of Multiparametric Technologies ]. Metallofizika i noveyshiye tekhnologii [Metal Physics and Advanced Technologies]. 2017, vol. 39, no 3, рp. 949-957. (in Russian).
Volchuk V.M. Opredeleniye chuvstvitel'nosti mul'tifraktal'nykh kharakteristik metalla [Determining the sensitivity of the multifractal characteristics of metals]. Visnyk Prydniprovs’koyi derzhavnoyi akademiyi budivnytstva ta arkhitektury [Bulletin of Prydniprovska State Academy of Civil Engineering and Architecture]. 2015, no. 12, pp. 10–14. (in Russian).
Bolshakov V.I., Volchuk V.M. and Parhomenko O.F. Evaluation of High Strength Steel Fatigue. UDCS'19: Fourth International Iron and Steel Symposium (April 4-6, 2019,KarabukUniversity),Karabuk,Turkey, 2019, vol. 4, рр. 415-417.
Volchuk V.M. and Parhomenko O.F. Fractal approach in assessing the quality of steel 20. Innovative Lifecycle Technologies of Housing, Industrial and Transportation Objects : collective monograph. Under the general editorship Savytskyi M., Dnipro: SHEE “Prydniprovska State Academy of Civil Engineering and Architecture”;Bratislava : Slovac University of Technology inBratislava, 2018, pp. 48-53.
Bolshakov V., Volchuk V. and Dubrov Yu. Fractals and properties of materials. Saarbrucken : Lambert Academic Publishing, 2016, 140 p.
Bolshakov V.I., Volchuk V.N. and Dubrov Yu.I. Puti prognoza mekhanicheskikh svoystv prokatnykh valkov [Ways to forecast the mechanical properties of the rolls]. Metaloznavstvo ta termichna obrobka metaliv [Metall Science and Heat Treatment of Metals]. 2014, no. 1. pp. 19-40. (in Russian).
Fortihin A.A. Zona kompromisu kryteriyiv yakosti stali St6 [Zone of compromise quality criteria of ST6 steel]. Visnyk Prydniprovs’koyi derzhavnoyi akademiyi budivnytstva ta arkhitektury [Bulletin of Prydniprovska State Academy of Civil Engineering and Architecture]. 2018, no. 6, pp. 77–82. (in Ukrainian).
Bolshakov V.I., Dubrov Yu.I., Kryulin F.V. and Volchuk V.N. Sposib vyznachennya fraktal’noyi rozmirnosti zobrazhennya [Method for Determining the Dimensionality of Images]. Patent product no. 51439А, UA. MPK 7 G06K9/00, bulletin no. 11, 2002. (in Ukrainian).
Hausdorff G. Dimension und auberes Mab. Mathematische Annalen. 1919, vol. 79, рр. 157-179. (in German).
Crownover R.M. Introduction to Fractals and Chaos.Boston,London: Jones and Bartlett Publishers Inc., 1995, 480 p.
Bolshakov V.I., Volchuk V.M. and Dubrov Yu.I. Osnovy organizacii fraktal'nogo modelirovaniya [Fundamentals of fractal modeling]. Kyiv, Ukraine : Akademperiodyka of National Academy of Sciences of Ukraine, 2017, 170 p. (in Russian).
Downloads
Published
Issue
Section
License
Authors that are published in this journal agree to follow the conditions:
Authors reserve the right to the authorship of his work and cede the right to the journal of first publication of this work on conditions of the license under the Creative Commons Attribution License, which allows others to distribute it freely with the obligatory reference to the author of the original work and the first publication of the work in this journal.
